Vacuum cleaner not working, not sucking!?!?

kems18 need help to clarify doubt about: : Vacuum cleaner not working, not sucking!?!?
My vacuum cleaner isn’t sucking anything in, the roller works fine, everything works fine, its just not sucking anything in, even the attachments……any suggestions????

Try this:

Answer by mr clever
Sounds like its knackered- buy a new one…!

What do you think? Answer below!

10 COMMENTS

  1. check the bag…if its too full it wont allow it to create a “vacuum”…hence the name 🙂

    could also have a hole in the tube near the base

    B.

  2. check the hose, disconnect the hose, put a penny in one end and see if it comes out the other end. Sounds like you have something stuck in it

  3. Is the drive belt (fan belt) in place? It may have something stuck in the airway/suction area that needs to be removed. Please, if you can’t do it yourself, take it to a vacuum place to have it looked at.

  4. Your hose is clugged you need to clear the the air way from the hose to the vaccum itself.

  5. Could be a blockage in the pipe. It’s a curse when this happens. I got from plumber a length of narrow plastic pipe, which I clear obstructions with.The other thing are the filters clean? This is often a problem with Vacuums. The only other thing could be the motor’s stuffed and you need a new machine. Good Luck!

  6. probably just needs a good cleaning,,you might have some expert check it out …you might have some kind of object stuck in there….it doesn’t sound like if you need a new one just yet ,,so, check it out first…..good luck

  7. It sounds like you have a clog, usually a clog will happen at a bend in the hose so follow it from the bag to were you put the attachment on and check every bend. You can also have a clog right at the opening that the bag attaches to so stick your finger in there and check for a clog. If you don’t find a clog then I don’t know what to tell ya *grin*!

LEAVE A REPLY

Please enter your comment!
Please enter your name here